This Paper extends from the importance and urgency of promoting the development of IC industry to the key technology of controlling IC yeid-wafers surface environmental contamination control(SECC).Recently,IRDS 2020 clearly put forward the key expound on yield enhancement,pointing out that airborne molecular contamination(AMC) is an important factor causing random defects in wafers,and this effect...
1. Glasses cloth.This cloth uses microfiber as the base material, which can remove the fine dust and dirt on the lens and make the vision clearer. This cloth does not lint, does not fade, feels soft and easy to wipe. 2. Mobile phone cloth.This cloth uses microfiber as the base material, which can remove fingerprint dust and dirt on the screen of the mobile phone, making the screen as clean as new....
1. No edge sealing (cold cutting) The dust-free wiping cloth is mainly cut directly by electric scissors, and the cutting method is easy to generate dander, and can not be cleaned after cutting, during wiping A certain amount of cloth dust will be produced on the side, and there is no cleanliness. It is generally not recommended to use high-end wipes. 2. Laser cutting The laser can be melted at a ...
1. Remove bacteria from the lens to achieve disinfection. 2. Clean the surface of glasses, glass mirrors and other mirrors of various types of glass, resin, etc., remove stains and absorb grease. 3. Extend the life of the lens. 4.To prevent the traditional cleaning cloth to wipe the lens off the dander, leaving water marks. 5. Thoroughly remove the stubborn stains left on the lens to make the pict...
Stencil Wiping Rolls are used to remove residual solder paste from the bottom side of PC Board stencils. Using Stencil Wiping Rolls prevents smearing, bridging, and solder balls caused by normal printing of solder paste onto PC Boards. We manufacturer Stencil rolls in a wide range of sizes to fit popular printer models including; DEK machines, Speedline machines, MPM machines, EKRA machines, Panas...
Overview clean paper From its English name, we can see the two main characteristics of clean paper: one is that the raw material is wood pulp fiber; the other is the use of airlaid technology. The production process of non-woven fabrics is mainly two processes of network formation and reinforcement. The production of dry-laid nonwovens mainly adopts two methods: chemical bonding and thermal bondin...
2
2
pagesCategories
New Blog
Copyright © 2024 Nanan Jiedao Electronic Material Co.,Ltd.. All Rights Reserved. Powered by
IPv6 network supported